Product Features
A. Variety of options
1. Piston type single-stage parallel unit(20HP~350HP), evaporating temperature 7.5ºC~-45ºC
2. Piston type double-stage parallel unit(16HP~180HP), evaporating temperature -25ºC~-65ºC
3. Screw type single stage parallel unit(80HP~600HP), evaporating temperature 5ºC~-45ºC
4. Screw type double-stage parallel unit(100HP~600HP), evaporating temperature -30ºC~-65ºC
5. Adopted to multiple refrigerant R404a, R507, R407C, R22.
B. Stable & Reliable
1. The units are equipped with world famous brand high quality compressor and components, following the latest design, the perfect combination provides a safe and reliable system.
2.The unit comes standard with a controller that can effectively avoid turning on/off the motor frequently as well as safety protection modules including the following: Phase loss protector, Inverted sequence, overvoltage protector, undervoltage protector, oil pressure, high pressure, low pressure, motor overload.
3. High efficiency oil separating system. When power is on, there is no need to add lubricating oil, the standard provided oil heater (for screw unit), oil temperature controller (for screw unit) and oil level switch (for screw unit), etc. can protect the function.
4. The PLC controller is a standard provided component. It can automatically decide the compressor quantity to be used based on actual need of refrigerant capacity, average the running time between each compressor, save the power. All of these will guarantee an over 30% longer usage than single compressor condensing unit.
5. It has a unique low environment condensing pressure monitor system which guarantees a stable functioning when there is a low ambient temperature, lack of oil feeding or oil flow warning.
6. High efficiency gas liquid separator is used, with a unique pipeline design, it can effectively minimize the possibility of liquid strike.
7. The "Pressure Vessel Certificate" approved reservoir is provided as well as the safety relief valve.
8. Fault isolation device is served so that when a certain compressor breaks down, the rest of the unit can keep running appropriately, making sure that client has enough time for repair and replacement.
C. High efficiency & energy saving
1. Because of a huge demand difference between seasons for refrigerating capacity, the unit must have a high level control for capacity, so that the unit can keep running under high efficiency mode. The average parallel unit efficiency, according to different refrigeration system is 30% higher than single compressor unit.
2. Using multiple compressor parallel units can provide a multiple energy level control, the refrigeration output can be dynamically allocated more smoothly according to actual situation.
3. With high efficiency oil separator, only a small amount of lubricating oil enters the system, this largely brings up the heat exchanging efficiency.
4. The PLC controller monitors running compressors quantity, it maintains a maximum use rate even when only parts of the compressors are functioning.
5. PLC controller can be set with the best running curve (maximum & minimum power comsuption), to same as much electricity as possible.
6. With "modularized design" the risk during construction can be largely reduced, construction period can be shortened, improve the product quality controllability.
D. Compact & nimble
1. Components such as compressor, reservoir, gas-liquid separator, oil separator, economizer, intake manifold, fluid supply manifold, electrical control equipment are all centralized, making sure every inch of the space is fully used.
2. The unit has a compact structure, the space saved during assembly can provide more space for commercial use, benefiting the end user with extra profit.
E. Easy operation & convenience
1. With PLC safety auto control, client can program with touch screen, the graphical control interface can intently show the running status, recording data, parameter settings and false alarming, easy for operation.
2. The reserved remote communication interface can help customer to monitor remotely.
3. hanks to the print output interface, customer can print the running history data of the unit and the system.
Piston type parallel compressor unit standard configuration | | |
Parallel compressor unit assembly | | 6.Subcooler assembly (applies for single compressor double stage unit) |
Sturdy metal chassis | | Subcooler |
Lifting ring | | Subcooling expansion valve, subcooling solenoid valve, subcooling liquid sight glass, subcooling off-valve. |
Cushion | | |
| | 7.Gas-liquid separator |
Reservoir assembly | | |
Reservoir has 28 bar safety valve | | 8.Compressor electronic controller and protection assembly. |
Reservoir inlet/outlet off-valve | | Compressor high/low pressure controller. |
Reservoir sight glass | | Electronic overcurrent protector. |
Pipeline liquid sight glass | | Low pressure sensor |
Reservoir out filter barrel drier, contains filter | | Independent circuit breakers and thermal protector. |
Filter drier barrel oulet has shut-off valve. | | PLC controller and color touch screen. |
| | |
Exhaust gas assembly | | 9. Fluid supply manifold and return manifold assembly. |
Oil separator | | Fluid supply manifold and return manifold quantity in accordance with product catalog |
Oil separator outlet backstop shut-off valve | | Manifold adopts hard straight pipe. |
| | |
4 . Oil line assembly | | 10. Other |
Oil reservoir (with oil sight glass) | | Compressor pressure gauge |
Oil reservoir inlet/outlet off valve | | Repair valves are mounted on each manifold |
Oil line backstop valve | | Insulation materials for suction, economizer and cooling tube |
Oil outlet filter | | ICompressor unit suction off-valve |
Oil ball valve | | |
Oil level controller | | 11. Optional configures |
| | Refrigerant R22 or R404a |
Single compressor assembly. | | Reservoir can be vertical or horizontal |
Suction and discharge off-valve | | Fluid supply manifold shunt and return manifold shunt |
Compressor cushion | | Cooling type: air cooled, water cooled, evaporative cooled. |
Suction filter barrel, contains filter | | Other brand compressor and configurations |
Oil sight glass | | |
Oil pressure controller (oil pump lubrication) | | 12.Components that can be added |
Crankcase heater | | Compressor exhaust muffler |
Low temperature single stage compressor cylinder fan. | | High pressure sensor |
Low temperature single stage compressor liquid spray cooling | | Heat recovery device. |
| | IVHot gas defrost function |
| | Frozen oil |
Medium & low temperature piston type parallel unit
Refrigeration amount and power are set based on condensing temperature of 35ºC, used for evaporation condensation.
(OBBH) Rack model | 2-24L | 2-28L | 2-36L | 2-46L | 2-56L | 2-68L | 2-88L |
Evaporating temperature | -15ºC-35ºC |
Refrigerant | R404A |
Power | 380V/50HZ |
Compressor | Type | Semi hermatic piston type |
Model | 4PES12 | 4NES14 | 4HE18 | 4GE23 | 6HE28 | 6GE34 | 6FE44 |
Qty | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Refrigerating capacity & power | Evap. Temp.-15ºC | QoW | 46600 | 55600 | 75600 | 87800 | 111000 | 129800 | 156000 |
PeKW | 17.08 | 20.72 | 28.00 | 33.16 | 41.20 | 49.40 | 60.20 |
Evap. Temp -20ºC | QoW | 36860 | 44200 | 61000 | 71000 | 89600 | 105600 | 126400 |
PeKW | 15.28 | 18.66 | 25.42 | 30.06 | 37.42 | 45.00 | 55.00 |
Evap. Temp.-30ºC | QoW | 21660 | 26580 | 37680 | 44400 | 55600 | 66800 | 79400 |
PeKW | 11.46 | 14.28 | 19.96 | 23.56 | 29.28 | 35.74 | 43.8 |
Connector | Air inletmm | 45 | 45 | 57 | 76 | 76 | 76 | 76 |
Liquid outletmm | 19 | 22 | 22 | 28 | 35 | 42 | 42 |
Air outletmm | 28 | 35 | 35 | 42 | 42 | 54 | 76 |
Liquid inletmm | 22 | 22 | 28 | 28 | 35 | 42 | 42 |
Overall dimension | L(mm) | 1460 | 1460 | 1560 | 1560 | 1560 | 1560 | 1560 |
W(mm) | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
H(mm) | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| | | | | | | | | | |
(OBBH) Rack model | 3-36L | 3-42L | 3-54L | 3-69L | 3-84L | 3-102L | 3-132L |
ºC Evaporating temperature | -15ºC-35ºC |
Refrigerant | R404A |
Power | 380V/50HZ |
Compressor | Type | Semi hermatic piston type |
Model | 4PES12 | 4NES14 | 4HE18 | 4GE23 | 6HE28 | 6GE34 | 6FE44 |
Qty | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Refrigerating capacity & power | Evap. Temp.-15ºC | QoW | 69900 | 83400 | 113400 | 131700 | 166500 | 194700 | 234000 |
PeKW | 25.62 | 31.08 | 42.00 | 49.74 | 61.80 | 74.10 | 90.3 |
Evap. Temp -20ºC | QoW | 55290 | 66300 | 91500 | 106500 | 134400 | 158400 | 189600 |
PeKW | 22.92 | 27.99 | 38.13 | 45.09 | 56.13 | 67.5 | 82.5 |
Evap. Temp.-30ºC | QoW | 32490 | 39870 | 56520 | 66600 | 83400 | 100200 | 119100 |
PeKW | 17.19 | 21.42 | 29.94 | 35.34 | 43.92 | 53.61 | 65.7 |
Connector | Air inletmm | 57 | 57 | 76 | 76 | 89 | 89 | 108 |
Liquid outletmm | 22 | 28 | 28 | 35 | 42 | 54 | 54 |
Air outletmm | 35 | 45 | 54 | 54 | 76 | 76 | 76 |
Liquid inletmm | 28 | 28 | 35 | 42 | 42 | 54 | 54 |
Overall dimension | L(mm) | 2010 | 2010 | 2160 | 2160 | 2160 | 2160 | 2160 |
W(mm) | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
H(mm) | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| | | | | | | | | | |
Medium & low temperature piston type parallel unit
Refrigeration amount and power are set based on condensing temperature of 35ºC, used for evaporation condensation.
(OBBH) Rack model | 4-44L | 4-56L | 4-72L | 4-92L | 4-112L | 4-136L | 4-176L |
ºC Evaporating temperature | -15ºC-35ºC |
Refrigerant | R404A |
Power | 380V/50HZ |
Compressor | Type | Semi hermatic piston type |
Model | 4PES12 | 4NES14 | 4HE18 | 4GE23 | 6HE28 | 6GE34 | 6FE44 |
Qty | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Refrigerating capacity & power | Evap. Temp.-15ºC | QoW | 93200 | 111200 | 151200 | 175600 | 222000 | 259600 | 312000 |
PeKW | 34.16 | 41.44 | 56.00 | 66.32 | 82.4 | 98.8 | 120.4 |
Evap. Temp -20ºC | QoW | 73720 | 88400 | 122000 | 142000 | 179200 | 211200 | 252800 |
PeKW | 30.56 | 37.32 | 50.84 | 60.12 | 74.84 | 90.00 | 110 |
Evap. Temp.-30ºC | QoW | 43320 | 53160 | 75360 | 88800 | 111200 | 133600 | 158800 |
PeKW | 22.92 | 28.56 | 39.92 | 47.12 | 58.56 | 71.48 | 87.6 |
Connector | Air inletmm | 57 | 76 | 76 | 108 | 108 | 108 | 125 |
Liquid outletmm | 28 | 35 | 35 | 45 | 45 | 45 | 57 |
Air outletmm | 45 | 57 | 76 | 76 | 76 | 76 | 76 |
Liquid inletmm | 28 | 35 | 45 | 45 | 57 | 57 | 76 |
Overall dimension | L(mm) | 2560 | 2560 | 2760 | 2760 | 2760 | 2760 | 2760 |
W(mm) | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
H(mm) | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| | | | | | | | | | |
(OBBH) Rack model | 5-60L | 5-70L | 5-90L | 5-115L | 5-140L | 5-170L | 5-220L |
ºC Evaporating temperature | -15ºC-35ºC |
Refrigerant | R404A |
Power | 380V/50HZ |
Compressor | Type | Semi hermatic piston type |
Model | 4PES12 | 4NES14 | 4HE18 | 4GE23 | 6HE28 | 6GE34 | 6FE44 |
Qty | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Refrigerating capacity & power | Evap. Temp.-15ºC | QoW | 116500 | 139000 | 189000 | 219500 | 277500 | 324500 | 390000 |
PeKW | 42.7 | 51.8 | 70.0 | 82.9 | 103 | 123.5 | 150.5 |
Evap. Temp -20ºC | QoW | 92150 | 110500 | 152500 | 177500 | 224000 | 264000 | 316000 |
PeKW | 38.2 | 46.65 | 63.55 | 75.15 | 93.55 | 112.5 | 137.5 |
Evap. Temp.-30ºC | QoW | 54150 | 66450 | 94200 | 111000 | 139000 | 167000 | 198500 |
PeKW | 28.65 | 35.7 | 49.9 | 58.9 | 73.2 | 89.35 | 109.5 |
Connector | Air inletmm | 76 | 76 | 89 | 108 | 108 | 125 | 2*108 |
Liquid outletmm | 28 | 35 | 45 | 45 | 45 | 57 | 76 |
Air outletmm | 57 | 57 | 76 | 76 | 76 | 76 | 89 |
Liquid inletmm | 35 | 45 | 57 | 57 | 57 | 76 | 76 |
Overall dimension | L(mm) | 3110 | 3110 | 3360 | 3360 | 3360 | 3360 | 3360 |
W(mm) | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
H(mm) | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| | | | | | | | | | | | |
Medium & low temperature piston type parallel unit
Refrigeration amount and power are set based on condensing temperature of 35ºC, used for evaporation condensation.
(OBBH) Rack model | 6-72L | 6-84L | 6-108L | 6-138L | 6-168L | 6-204L | 6-264L |
ºC Evaporating temperature | -15ºC-35ºC |
Refrigerant | R404A |
Power | 380V/50HZ |
Compressor | Type | Semi hermatic piston type |
Model | 4PES12 | 4NES14 | 4HE18 | 4GE23 | 6HE28 | 6GE34 | 6FE44 |
Qty | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
Refrigerating capacity & power | Evap. Temp.-15ºC | QoW | 139800 | 166800 | 226800 | 263400 | 333000 | 389400 | 468000 |
PeKW | 51.24 | 62.16 | 84.0 | 99.48 | 123.6 | 148.2 | 180.6 |
Evap. Temp -20ºC | QoW | 110580 | 132600 | 183000 | 213000 | 268800 | 316800 | 379200 |
PeKW | 45.84 | 55.98 | 76.26 | 90.18 | 112.26 | 135.0 | 165.0 |
Evap. Temp.-30ºC | QoW | 64980 | 79740 | 113040 | 133200 | 166800 | 200400 | 238200 |
PeKW | 34.38 | 42.84 | 59.88 | 70.68 | 87.84 | 107.22 | 131.4 |
Connector | Air inletmm | 76 | 76 | 76 | 89 | 108 | 2*108 | 2*125 |
Liquid outletmm | 35 | 45 | 45 | 45 | 57 | 76 | 76 |
Air outletmm | 57 | 76 | 76 | 76 | 89 | 89 | 108 |
Liquid inletmm | 45 | 57 | 57 | 57 | 76 | 76 | 76 |
Overall dimension | L(mm) | 3660 | 3660 | 3960 | 3960 | 3960 | 3960 | 3960 |
W(mm) | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
H(mm) | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| | | | | | | | | | | | |